Plasti Dip Blaze is a unique collection of neon Plasti Dip colors that deliver eye-catching looks for any application. Use Plasti Dip Blaze anywhere you need bright, easy to see colors—you can use it to improve visibility for safety concerns, to add can’t-miss color to frequently misplaced items, or for a one-of-a-kind look on almost any do-it-yourself project.
For best results and long-term bright colors of the Blaze product line, it is recommended that you pair the product with a white Plasti Dip base coat and then a top coat with Plasti Dip Satinizer™ or Glossifier™, which both contain Fadebuster™ protection.
Important information about Blaze colors: Due to their unique composition, fluorescent pigments like the ones used in Plasti Dip Blaze tend to fade faster than other colors. Plasti Dip International has taken preventative measures, including the addition of a UV protector to the formula, to help our Blaze colors stay brighter longer, but some fading is inevitable. However, in most instances, quick touch ups as needed should be sufficient to keep Blaze colors bright.
All Plasti Dip Blaze colors are available in 11 oz. aerosol cans.
ATTRIBUTES OF PLASTI DIP:
Protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip
Remains flexible and stretchy over time
Will not crack or become brittle in extreme weather conditions
Proven in temperatures from -30°F to 200°F
Peelable and removable off of most surfaces
HOW TO DIP
Dipping (14.5 and 22 oz. cans)
Surface must be clean and dry. For best results, avoid direct sunlight, high humidity or breezy conditions.
Stir gently and thoroughly before each use.
Attach wire or string to hang item.
Insert item 1” every 5 seconds; withdraw at same rate.
Recommended 2-3 coats for best results.
Allow 30 minutes minimum dry time before use.
Brushing (14.5 and 22 oz. cans)
Surface must be clean and dry. For best results, avoid direct sunlight, high humidity or breezy conditions.
Stir gently and thoroughly before each use.
Dilute as needed (10-20%) with naphta.
Apply heavy coats; avoid brushing back and forth.
Allow 30 minutes minimum between coats. Apply as many coats as desired.
Dipping/Brushing Tips:
If thinning is desired, product thickens, or for cleanup, use naptha, xylene (xylol), or toluene (toluol) solvents. Allow 4 hours per coat for complete dry. Keep container tightly closed when not in use. When applied properly Plasti Dip can be removed from most surfaces, if desired.
HOW TO SPRAY
Spraying (11 oz. aerosol)
Surface must be clean and dry. For best results, avoid direct sunlight, high humidity or breezy conditions.
Shake can vigorously for one full minute after mixing ball begins to rattle. Shake often while applying.
Hold can 6-10” from surface, moving can back and forth, slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.
Allow 30 minutes minimum between coats. Apply as many coats as desired (3-4 average).
Allow 4 hours minimum dry time before use. Coverage: Approximately 5-10 sq. ft. per can.
Spraying Tips:
Always protect surrounding areas from overspray. Allow 4 hours per coat for complete dry. If runs or sags are experienced, move can further away from surface. To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem. Use naphtha, xylene (xylol), or toluene (toluol) for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip. For best results, use a pumice (crystalline silica) grit. Results may vary with other grit additives. When applied properly Plasti Dip can be removed from most surfaces, if desired.
Color Available:
Blaze Purple
Blaze Pink
Blaze Blue
Blaze Orange
Blaze Green
Inquiry - PLASTI DIP BLAZE