2

Share:


GM TECH Plastic Coating

Select variant(s): Option
Option


The ultimate solution to faded plastic trim.Use GM-TECH PLASTIC RESTORER COATING to restore the colour to black and grey interior and exterior trim.It cures as a coating onto plastics and vinyl.It provides unmatched protection and is durable for months.GM-TECH PLASTIC RESTORER COATING brings back its original condition. Directions: Wear gloves first to protect hands from being dirty.Clean plastic surface with GM-Tech multipurpose cleaner to remove dirt and dust.If it is badly oxidized.Use sand paper at 1500 grit and sand lightly in a circular motion.Then,pour small amount of plastic restorer coating onto applicator.Apply evenly and gently to all surfaces until colour is evenly dispersed.It dries fast and is water repelling.Wipe off any excess residue.Repeat steps if necessary. Caution: Combustible. Ingredients may cause skin and eye irritations.

KEEP OUT OF THE REACH OF CHILDREN! Keep away from ignition sources.Avoid minimize vapors.Keep indoors.Protect from frost.
IF SWALLOWED: Do not induce vomiting. Call physician Immediately.
FOR EYES: In case of contact with eyes,flush with plenty of water immediately of 15 minutes and get the medical attention.
FOR SKIN: Use a suitable barrier cream and wash hand thoroughly at the end of each use.
INHALATION: Remove to fresh air.If breathing difficulty persists of occurs later consult a physician.May irritate respiratory system.Overexposure may cause headaches,nausea and dizziness.Repeated overexposure may effect kidney and liver and cause permanent nervous system injury. Use only with a suitable,approved respirator if above the TLV. Advisable to use approved Dust Respirator and appropriate GmPlasticCoating


 Inquiry - GM TECH Plastic Coating